Wessex AR rotary mowers are the first choice for paddock topping & maintaining regularly mown grass areas. Well suited to general pasture topping or fine turf work, Wessex AR’s are popular on farms, studs and private estates, and will complement an ATV, utility vehicle or 4 x 4. Available in 1.2m, 1.5m and 1.8m working widths, & with a variety of engine sizes, the AR Series rotaries are robust and durable machines ideally suited to private estates, farms, and studs. Standard machines are fitted with side mounted wheels, which allow ground contours to be followed accurately without scalping. However, if a machine is required to mow close to borders and fences etc, the optional rear wheel configuration is available on the 1.2m and 1.5m models only. With wheels behind the machine, the weight on the ball hitch is greatly increased, therefore when using a rear wheeled machine, the towing vehicle must have adequate weight capacity on the draw bar. If the towing vehicle has inadequate drawbar capacity, the third wheel option is available. The entire weight of the machine is now on its own wheels and the drawbar is floating.
12.5hp Briggs & Stratton engine and electric start option
In-line rear wheels (for cutting right to the edge)
The drawbar can easily be off-set to one side, to allow the machine to cover one wheel of towing vehicle
All models feature three overlapping rotors to eliminate uncut strips of grass, and rigid cutterbar blades for durability
Drive is transmitted to the rotors via two vee-belts and a centrifugal clutch. Both belts are tensioned simultaneously by one simple sliding action of the engine mounting bracket.
The height of cut is set by re positioning the wheels by means of a spring loaded pin mechanism on the wheel brackets. A turn buckle on the drawbar allows the machine to be leveled at any cutting height.
This entry level Silver Series 12 volt Demount Sprayer, also known as a Skid Mounted Sprayer, is constructed with a blown polyethylene tank mounted on a powder coated chemical resistant steel frame. It is cost effective and affordable and designed to be fitted to the rear carry area of any pick up, S x S (side by side) or UTV type vehicle.
The ‘Boomless Nozzle’ option provide a single nozzle mounted to the rear of the sprayer and is ideal for use in areas where there are obstacles to spray around and spray drift will not harm the surrounding area.